

- #MAC TO MAC FIREWIRE CCABLE HOW TO#
- #MAC TO MAC FIREWIRE CCABLE MAC OS X#
- #MAC TO MAC FIREWIRE CCABLE PRO#
Try plugging a 1394 Hard Drive into the computer to verify the 1394 port is working, and/or plug the 16.4.2 into another computer to verify that the 1394 on it is working.

You must power down both the mixer and the computer before connecting or disconnecting the 1394 cable. This Apple Thunderbolt to FireWire adapter allows you to connect your devices with a FireWire input, to your MacBook or iMac with Thunderbolt 2 input. Simply connect the hub to your Mac using a FireWire cable, connect its. Click Advanced, click DNS, then enter the DNS and search domain addresses if your network requires them. Installing and using a FireWire hub is also as simple as installing and using a USB hub.

#MAC TO MAC FIREWIRE CCABLE PRO#
On your Mac, choose Apple menu > System Preferences, then click Network. These Mac models have Thunderbolt 4 (USB-C) ports: Mac Studio (2022) MacBook Pro (14-inch, 2021) MacBook Pro (16-inch, 2021) You can connect external displays and other devices that connect using a Thunderbolt 4 cable, Thunderbolt 3 cable, or USB-C cable. If you are still having this issue, then there may be a problem with the 1394 ports either on your Mac or on the StudioLive 16.4.2ġ394 / FireWire is NOT a hot plug technology like USB is. Connect a FireWire cable to the FireWire ports on the computers you want to connect. The MacBook Pro, MacBook Air, Mac Studio, Mac mini, and 24-inch iMac have a 3.5mm headphone jack.

Then once it's removed, you'll need to reinstall Universal Control 1.2 found at the very bottom of this page:
#MAC TO MAC FIREWIRE CCABLE HOW TO#
Please review this article on how to remove Universal Control from your system: IP Camera: Sercomm icamera2 This allows Internet Gateways to use port. Easily connect your Thunderbolt-equipped Mac to a FireWire device with the Apple Thunderbolt to FireWire Adapter. After a few moments, a blue screen should appear with a yellow Firewire icon. The steps below assume you already have the MAC address of your camera installed. Next, power on the target Mac while holding down the ‘T’ key. An external drive must be turned on and on a Mac (with a power switch) by installing one end of an interface cable into. You may have installed a newer version of Universal Control that does not support this old version of OS X. With this Firewire cable ready, switch off both Mac’s and first connect the Firewire cable to the target Mac this is the Mac which has the hard drive which we wish to read from, or write to.
#MAC TO MAC FIREWIRE CCABLE MAC OS X#
Small and compact, it connects to the Thunderbolt port on your Mac computer, giving you a FireWire 800 port that supplies up to 7W for bus-powered peripherals like hard drives and audio devices.The only version of Universal Control that is supported on Mac OS X 10.5 is Universal Control 1.2.
